| Height Of Centre |
150 Mm |
Nos. Of Feeds Range. |
24 Nos. |
| Maximum Swing |
|
Longitudinal- |
0.04 to 0.63 mm/rev |
| Over Bed |
300 Mm (In Gap 450 Mm ) |
Transverse - |
0.015 to 0.21 mm/rev |
| Over Cross Slide |
200mm |
Ratio Of Transverse Feed To Longitudinal Feeds |
1/3 |
| Distance Between Centre |
1000mm |
Lubrication System |
Yes |
| Bed Width |
240 mm |
Threads |
|
| Maximum Facing Dia. |
400 Mm In The Gap |
Type |
Pitch Range |
| Main Spindle |
|
Metric IS: 4218 - |
0.5mm To 7 Mm |
| Type And Size Of |
American |
Module - |
0.25 To 1.75 Mm |
| Spindle Nose |
A2-6 |
Inch - |
56 To 4 Tpi |
| Spindle Taper Bore |
Metric-60 |
D.P. - |
16 To 112 |
| Spindle Sleeve |
MT-3 |
Lead Screw Pitch - |
6 mm |
| Bore In Spindle |
55 mm |
Capacity Of Steady Rest Bar Dia |
|
| Tail Stock |
MT-3 (Tang Shank Type) |
Pad Type Min. & Max Dia |
10 Mm & 125 Mm |
| Sleeve Travel Manual |
140 Mm |
Roller Type Min & Max Dia |
10 Mm & 100 Mm |
| Sleeve Dia Meter |
50 Mm |
Capacity Of Follow Rest Bar Dia |
|
| Maximum Offset Of Tailstock |
13 Mm (On Either Side Of Centre Line ) |
Pad Type Min. & Max Dia |
10 Mm & 100 Mm |
| Carriage Cross Slide Travel |
200 Mm |
Roller Type Min & Max Dia |
10 Mm & 75 Mm |
| Dial Graduation |
0.02 Mm / 1 Div |
Electricals Main Motor Power |
5.5 Kw 7.5 HP), 415 V 3 Ph, 50 Hz |
| Type Of Tools Holder |
QCTP Tool Post, 4 Way |
Coolant Pump |
|
| Tool Or Top Slide Travel |
100 Mm |
Output (S) Of Motor |
0.11hp |
| Tool Shank Section |
25mm X 25mm |
Speed Of Motor |
2800 Rpm |
| Dial Graduation |
0.02 Mm / 1 Div |
Coolant Tank Capacity |
30 Ltrs |
Main Spindle
No. Of Spindle Speed And
Range Forward/ Reverese |
Forward :8 & 70-1600rpm,
Reverse :8 & 70-1600 rpm |
Noise Level Of Machine |
85 Db |
| |
|
D.R.O. |
D.R.O. Z & Y Axis |
Taper Turning Attachment: Max Angle on either side: 10°, Stroke: 300 mm, Max Turning Length – 240 mm
Features:
Bed made of Hardened & Grounded Guideways of Nickel Chromium alloy Cast Iron of Grade 26 with hardness BHN 350, prismatic guideways.
HS & TS legs: Made of Grade 25 cast iron with thickness 12 to 15 mm.
Head Stock: Made of high-quality FG25 cast iron, with center height, center distances & co-axial tolerances within 0.01 mm.
Main Spindle: Case hardened alloy steel. Spindle taper bore and bearing ODs provide runouts within 0.003 to 0.004 mm.
Feed Box: Maintains center distances and co-axial ovality within 0.01 mm.
Tailstock: Tolerance 0.02 mm.
Head Stock Gears: Made of case-hardened steel 20MnCr5. Induction hardened gear teeth (55 to 60 HRC), profile ground to class 6e accuracy. Noise level: 80 dB. Case depth: 0.5 to 0.7 mm. Built with reference to ISI878/1979 Part-1.
Headstock bottom "V" and flat surfaces scraped for proper seating with 20 to 24 points per 25 x 25 mm square.
Electrical: 415 V ±2%, 3-phase, 50 Hz motor with ammeter, overload protection starter, and single-phase prevention.
Machine light: 230 V
Coolant Pump: With complete fittings
Lubrication system: For rotating and sliding components. Includes splash and protection guard, one set of change gears, chuck plate, two turning and one boring tool holder, chip tray/scrap tray fitted on the machine.
Accessories:
- 4-jaw independent chuck
- 3-jaw self-centering chuck
- Fixed steady
- Face plate
- Driving plate
- 4-way tool post
- Quick change gearbox for metric/British threads
- Live and dead centers with taper attachments
- Motor – 5.5 KW (with D.R.O. on Z & Y axis)
- Telescopic taper turning attachment
- Oil gun
- Service tools
- Self-centering chuck – 200 mm with key
- 4-jaw chuck – 250 mm dia. with keys
- Dead center for tailstock
- Face plate – 400 mm dia.
- HSS carbide tip turning & boring tool
- Tool post keys
- Right/left hand brazed carbide turning tool
- Brazed carbide boring, parting & threading tool
- Knurling tool (cross & straight)
- Drill chuck with MT-3 and MT-4 sockets
- Drill – 12 mm, center drills – 3 mm & 5 mm
- Dead center or revolving center
- Reamer – 13 mm
- Manuals
- Foundation pads and bolts